The DDP10EF is a 1U DDP base system with redundant power supplies.
It comes with dual 100 GbE/QSFP28 ports. The empty PCIE slot can be filled with an EX card or an Ethernet card.
Its SIOM port can be equipped with a dual 100Gig, dual 10/25Gig optical or dual 10GbE copper card.
The DDP10EF can be filled with an NVME SSD4 and or an NMVE SSD6 pack.
The SSDs are configured as one RAID5 set. The NVME SSD are from 0.96 to 30.72 TB.
When fully loaded and with the proper Ethernet ports read bandwidth can be 40GB/s and write bandwidth 24GB/s with 270TB usable capacity.
The DDP10EF can of course be used as a standalone system.
But since the DDP10EF uses A/V FS under the hood it can also be used as a cache when one or more hard disk storage arrays are connected.
When that is the plan an EX card must be installed in the available PCIE slot.
DDP16,24 and 78EXR storage arrays with hard disks can be connected. To be able to use a combination of NVME SSDs and hard disks integrated within a single file system A/V FS with caching is pretty unique. It gives a customer again the best of both worlds.
On Windows and Linux the DDP10EF can be accessed using iSCSI and NVME-oF/RDMA. On Mac iSCSI is used. Bandwidth on a desktop can be up to 11GB/s.
On www.ddpsan.com/Products/DDP10EF and in the documentation section reachable at the end of the page there are leaflets with further information.
